Cabletron Systems SWPIM-SY, Installation Manual, Page: 24 / 52

Chapter 1: Installation
1-4 SWPIM-SY Installation Guide
1.3 LANVIEW LED INDICATIONS
Refer to Table 1-1 for the link LED indications for the SWPIM-SY. The
link LED is multicolored and will display different colors and on/off rates
to indicate different situations.
1.4 CONNECTING TO THE NETWORK
Figure 1-2 depicts a common configuration for the SWPIM-SY. It is
shown only as an example of a setup used for the SWPIM-SY.
Figure 1-2 Common Configuration for the SWPIM-SY
Table 1-1 Link LED
Color Indication
Off Disabled or not configured
Red No Link
Amber Transmit or Receive Traffic
Blinking Amber Loopback Test Mode
Green Port is Active
Blinking Green Port is in test mode
SSR-600
SSR-600
SWPIM-SY SWPIM-SY
Site 1
Site 2
CSU/DSU CSU/DSU
WAN