manualshive.com logo in svg

Cabletron Systems SWPIM-BRI, Installation Manual

Share
Download
Cabletron Systems SWPIM-BRI Installation Manual Download Page 21

 

SWPIM-BRI Installation Guide

1-1

 

CHAPTER 1

INSTALLATION

 

This chapter covers the following items:

 

•

 

Unpacking the SWPIM-BRI (Section 1.1)

 

•

 

Installing the SWPIM-BRI into the host platform (Section 1.2)

 

•

 

A description of the LANVIEW LED indications (Section 1.3)

 

•

 

Connecting the SWPIM-BRI to the network (Section 1.4)

 

•

 

What to do once the SWPIM-BRI is installed (Section 1.5)

 

1.1

UNPACKING THE SWPIM-BRI

 

Use static electricity precautions when handling the SWPIM-BRI.

 

1.

 

Open the packing box and remove the SWPIM-BRI.

 

2.

 

Attach the antistatic strap (refer to the instructions in the wrist strap 
package) before removing the SWPIM-BRI from the antistatic 
packaging.

 

3.

 

Verify that the SWPIM-BRI is undamaged. Refer to Getting Help if 
there is any damage to the device. Do not attempt to install the 
SWPIM-BRI if it is damaged.

 

Only qualified personnel should install the SWPIM-BRI.

!

CAUTION

Failure to observe static safety precautions could cause 
damage to the SWPIM-BRI. Follow static safety handling rules 
and wear the antistatic wrist strap shipped with the 
SWPIM-BRI.

!

CAUTION

Do not cut the non-conductive bag to remove the device. 
Damage could result from sharp objects contacting the device 
or components.

Summary of Contents for SWPIM-BRI



































Reviews:

No comments

Brands by name

Popular brands

Load more brands