9032073 E2
Introduction
1-9
SPMA Support
This button accesses the Community Names Tool, which allows you to change
device community names. Refer to Chapter 3, Using the SPMA Community
Names Tool, of the Tools Guide.
This button accesses the Frame Priorities window, which allows you to set the
priority in which frames types are queued for transmission by the device.
Refer to the 2E42 User’s Guide.
This button accesses a window that displays current physical and logical
system resources and utilizations on the device. Refer to the 2E42 User’s
Guide.
This button allows you to monitor broadcast traffic statistics on each interface
and set thresholds to limit broadcast traffic over the device. Refer to the 2E42
User’s Guide.
This button accesses the MAC Priorities window, which allows you to set the
priority in which frames are queued by MAC address for transmission by the
device. Refer to the 2E42 User’s Guide.
This button accesses the SNMP Trap Tool, which allows you to establish
which network management workstations on your network receive trap
alarms from a selected device. Refer to Chapter 6, Using the SNMP Traps
Tool, of the Tools Guide.
This button accesses the Port Priority window, which allows you to set the
priority in which frames are queued on selected ports for transmission by the
device. Refer to the 2E42 User’s Guide.
This button allows you to configure alarms and events for each available
interface. Refer to the 2E42 User’s Guide.
Community Names
Frame Priorities
System Resources
Broadcast Suppression
MAC Priorities
Trap Table
Port Priorities
Basic Alarms
