manualshive.com logo in svg

Cabletron Systems Spectrum 2E42-27, User Manual

Share
Download
Cabletron Systems Spectrum 2E42-27 User Manual Download Page 116

Chapter 5: Local Management

5-64

2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide

3.

Use the arrows keys to highlight the SAVE command at the bottom of 
the screen.

4.

Press ENTER. The message “SAVED OK” displays and the Time 
Since Peak field is also reset.

5.19

DEVICE STATISTICS MENU SCREEN

The Device Statistics Menu screen, 

Figure 5-26

, provides access to 

screens that allow the user to obtain switch statistics about frame traffic 
through each interface and view operating statistics about each port.

To access the Device Statistics Menu from the Device Menu screen, use 
the arrow keys to highlight the DEVICE STATISTICS menu item and 
press ENTER. The Device Statistics Menu

 

screen displays.

NOTE

The following menu item on the Device Statistics Menu screen 
does not display if the operational mode of the device is set to 
SECURE FAST VLAN:

SWITCH STATISTICS

Section 5.7.9

 provides instructions on setting the operational 

mode.

Summary of Contents for Spectrum 2E42-27





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands