M
ODULE
C
ONNECTIVITY
O
VERVIEW
The SmartSwitch Remote Access Module can communicate with various CyberSWITCH products
in addition to other modules via a PPP connection. We will use an example configuration to
describe how to set up an IP network with a SmartSwitch Remote Access Module and other remote
devices including a CSX1204, a CSX100, and a modem user device. For this example, we are
assuming that SmartSwitch Remote Access Module “Central” is the central site system, and that the
remote devices will want to call into it; site Central may or may not want to call into the remote sites.
To configure this network, we will use SFVRA Configuration Manager (SFVRA-CFG). SFVRA-CFG
allows you to centrally configure and manage a network that includes SmartSwitch Remote Access
Modules and CyberSWITCH systems.
We illustrate the example with the following graphic.
ISDN
CSX1204
IP Address:
231.231.220.1
MMAC-Plus with
SmartSWITCH
Remote Access Module
IP Address:
231.231.231.1
MMAC
PLUS
C a b l e t r o n
Systems
POTS
Modem User
IP Address from pool
C A B L E T R O N S Y S T E M S
CSX100
IP Address from pool
WORKGROUP REMOTE ACCESS SWITCH
LAN
10BASE-T
RX
TX
SERVICE
CH-2
D-CH
CH-1
SYNC
POWER
LINE
1
CH-2
D-CH
CH-1
SYNC
LINE
2
CH-2
D-CH
CH-1
SYNC
LINE
3
CH-2
D-CH
AGI
CH-1
SYNC
LINE
4
Site "Central"
Site "Rem_1204"
Site "Rem_100"
Site "Rem_Modem"
