Cabletron Systems SmartSTACK ELS100-24TXM, Installation And User Manual

Page: 60 / 117

46 ELS100-24TXM User Interface ELS100-24TXM
Port Configuration Menu
The Port Configuration Menu allows you to configure port settings for a
specific port. Select c from the Port Menu to view the Port Configuration
Menu. Figure 3-18 shows the Port Configuration Menu and the
accompanying table describes the Port Configuration Menu.
Figure 3-18. Port Configuration Menu
PORTS 1-5 CONFIGURATION Access Control: READ/WRITE
a Port Name
b. Port Enable
Yes
c. Flow Control Enable No
d. Auto-negotiation Enable No
e. Full Duplex Yes
f. Port Speed 100
x. Previous Menu
Enter Selection:
Selection Description
Port Name Allows you to assign an administrative name to the port (1-14
character range).
Port Enable Allows you to enable (Yes) or disable (No) the port(s).
Flow Control Enable Allows you to enable (Yes) or disable (No) flow control on the
port(s).
Auto-negotiation
Enable* Allows you to enable (Yes) or disable (No) the auto-negotiation
mode for the port(s).
If Auto-negotiation Enable is set to “No,” the Full Duplex and
Port Speed fields display and are eligible for configuration.
If Auto-negotiation Enable is set to “Yes,” the Full Duplex and
Port Speed fields disappear and the system automatically man-
ages these functions.
Full Duplex* Allows you to enable (Yes) or disable (No) the full duplex mode
for the port(s).
Port Speed* Allows you to set the speed (10 or 100Mbps) for the port(s).
* These parameters are not configurable for 100Base-FX ports, which only operate
in full duplex mode and at 100Mbps speed.