Cabletron Systems SmartSTACK 100 ELS100-24TXM, Installation And User Manual, Page: 43 / 117

9032785 ELS100-24TXM User Interface 29
Main Menu
The Main Menu is the first screen seen after successfully logging in to the
system. Figure 3-3 shows the Main Menu and the accompanying table
describes the Main Menu.
Figure 3-3. Main Menu
MAIN MENU Access Control: READ/WRITE
a. System Configuration Menu
b Switch Configuration Menu
c. Port Menu
d. Switch Statistics Screen
e. General Information Screen
f. Download Software Menu
g. Save Current Configuration
h. Return to Default Configuration
i. Logout
j. Reset
x. Previous Menu
Enter Selection:
Selection Description
System
Configuration Menu Contains commands and parameters that reflect the global
configuration of the switch related to management.
Switch
Configuration Menu Provides access to information and parameters affecting the
function of the switch, i.e. the movement of packets through
the switch. For example, you can configure Forwarding Ta-
ble, Spanning Tree, and virtual LANs (VLANs).
Port Menu Shows the configuration of the individual ports on the switch
and allows you to modify switch port operation.
Switch Statistics
Screen Presents switch-level and port-level statistics.
General Informa-
tion Screen Displays the system software version, switch serial number,
base MAC address, system up time and power-up count.
Download Software
Menu Contains parameters and commands for initiating a software
download to upgrade the switch operating software.
Save Current
Configuration Saves current switch operating parameters to non-volatile
memory.
Return to Default
Configuration Restores switch operating parameters to factory defaults.
You must reset the switch for activate default parameters.
Logout Logs out of the console interface. Once you logout, you must
enter a password before you can access the console inter-
face again.
Reset Performs a software reset of the switch by restarting the sys-
tem software and reloading all operating parameters.