TESTING AND LANVIEW
Page 4-28
Figure 4-1 Checkout Configuration
3.
Select 6 - SERVER on the LAN-Specialist and run the test. Verify
that this test passes.
•
The status on the LAN-Specialist should read 000, and a pass
LED should be lit on the LAN-Specialist.
•
This LAN-Specialist now acts as the SERVER unit and will act
as a packet echoer when used with another LAN-Specialist.
4.
Repeat these steps for each port, 1-8.
5.
If the MT-800 will be connected to a network, use the following
checkout procedures:
a.
Using an AUI cable, attach the other LAN-Specialist to a
properly functioning transceiver elsewhere on the network.
b.
Select 4 - NODE on the second LAN-Specialist and run the
test. Verify that this test passes.
•
At least 100 packets should be sent and received with no errors.
The packets will be received and sent back from the SERVER
LAN-Specialist that was left running on the other segment.
•
If this test fails, check that the tap connections are made
properly.
c.
Repeat these steps for Ports 1-8 on the MT-800.
LAN-MD
AUI Cable
MT-800
Front matterBook Page 28 Thursday, January 25, 1996 12:06 PM
