1
Appendix
9F116-01 Module Specific
Information
Introduction
This appendix contains local management information that is specific to the 9F116-01
Dual Port FDDI Bridge/Router Module.
Default Interface Codes
The Default Interface field on the General Configuration Screen allows you to enter a
number (one through four). Each number represents a default interface for the
module. The table below lists the numbers you can enter, each number’s
corresponding interface, and a brief description of that interface.
The default for this field is NONE, meaning no default interface selected.
Table 1. 9F116-01 Bridge/Router Module Default Interface Codes
Number
Interface
Description
1
SMB-1
1 mbps System Management Bus
2
SMB-10
10 mbps System Management Bus
3
FNB-1
Flexible Network Bus 1
4
FNB-2
Flexible Network Bus 2
