Installing the 9E423-24 Module
2-4
See the
Cautions
at the end of this table.
Table 2-1. Function of DIP Switch
Switch
Function
Description
8
Clear
Password
-1
This module stores user entered passwords in
NVRAM (Nonvolatile random access memory). To
clear these passwords, toggle this switch and then
reset the module’s processor. Once the module resets,
factory default passwords are placed in NVRAM. You
can use these default passwords or, if desired, enter
new passwords. To enter new passwords, refer to the
Module Local Management User’s Guide.
7
Clear
NVRAM
-2
This module stores user entered parameters such as IP
addresses, subnet masks, default gateway, default
interface, SNMP traps, bridge configurations and
module specific configurations in NVRAM. To clear
these parameters toggle this switch and then reset the
module’s processor. Once the module resets, factory
default parameters are placed in NVRAM. You can
use the default parameters or, if desired, enter new
parameters. To enter new parameters, refer to the
Module Local Management User’s Guide.
6
Force
BOOTP
Download
This module uses BOOTP (Boot Strap Protocol) to
download new versions of the image file into Flash
Memory. This procedure forces image files to be
downloaded from the PC or Workstation, configured
to act as the BOOTP server, connected to the EPIM
port in the Environmental Module.
5
Reserved
For Factory Use Only
4
Reserved
For Factory Use Only
3
Reserved
For Factory Use Only
2
Reserved
For Factory Use Only
1
Reserved
For Factory Use Only
1. Caution: Do not toggle Switch 8 unless you intend to reset the user
configured passwords to the factory default settings.
2. Caution: Do not toggle Switch 7 unless you intend to reset the user entered
parameters to the factory default settings.
!
CAUTION
