Cabletron Systems MMAC-Plus 9E312-12 Appendix Download Page 7

 

9E312-12 Module Specific Information

 6

 

Port Statistics Screen

 

The 9E312-12 Port Statistics Screen displays information and statistics about the 
module’s 12 Ethernet ports.

 

Figure 2. 9E312-12 Port Statistics Screen

                         MMAC-Plus  LOCAL MANAGEMENT

                               PORT STATISTICS

    Module Name: 9E312-12                        Firmware Revision: 01.00.23B

    Slot Number: 10                              BOOTPROM Revision: 01.00.03

                                  PORT #: 1

                OCTETS:     2294091

               PACKETS:        8425         LINK STATUS:                Link

          TOTAL ERRORS:           0

            COLLISIONS:           0         PORT TYPE:                  RJ45

  CRC/ALIGNMENT ERRORS:           0

     UNDERSIZE PACKETS:           0         PORT STATUS:             ENABLED

      OVERSIZE PACKETS:           0

             FRAGMENTS:           0         APPLICATION:            BRIDGING

               JABBERS:           0

                                            OPERATION MODE:    STANDARD ENET

         PORT #: 1                                                    RETURN

Summary of Contents for MMAC-Plus 9E312-12










Reviews: