Cabletron Systems MCC-16, User Manual, Page: 27 / 90

INSTALLATION
2-7
To unpack a CM:
1.
Carefully remove the CM and other items from the shipping box.
You should have the following items:
•
CM
•
Quick Reference Card for the CM
Save the box and packaging materials for possible future repackaging
and shipment.
2.
Remove the CM from the protective bag and place it on top of the bag
in a dry, static-free, dust-free area.
3.
Inspect the shipment for any signs of damage.
2.6 INSTALLING A CM
Install a CM into the MCC-16 as follows:
1. Remove the protection panel from any CM slot in the MCC-16, as
shown in
Figure 2-6 .
(Note that on the first installation of a CM it will be necessary to
remove one of the 8-slot protection panels.)
Only qualified personnel should perform these procedures in
an activated MCC-16. It is recommended that all other
personnel shut down the MCC-16 before installing or
de-installing CMs to eliminate potential damage to the MCC-16
or the potential hazard of electrical shock.
!
CAUTION
Ensure that protection panels are fastened to the MCC-16 on
slots not occupied by CMs. This reduces safety hazards and
helps prevent problems associated with electro-magnetic
Interference (EMI).