Cabletron Systems Expansion module DELHE-UA, User Manual

Page: 25 / 50

DELHE-UA User’s Guide 2-1
CHAPTER 2
INSTALLATION
To install the DELHE-UA the following items are required:
• Antistatic wrist strap
• Phillips screwdriver
• Fast Ethernet (Port) Interface Modules (FEPIMs) in the appropriate
media
2.1 UNPACKING THE DELHE-UA
Unpack the DELHE-UA as follows:
1. Remove the DELHE-UA from the shipping box.
2. Leave the module in its antistatic bag until you are ready to install it.
3. Attach the antistatic wrist strap (refer to the instructions on the
antistatic wrist strap package for proper use).
Before attempting to use the DELHE-UA you should be familiar
with the
IEEE 802.3, 802.3 10BASE-T, and 802.3u 100BASE-T
Specifications.
!
The DELHE-UA and the host platform are sensitive to static
discharges. Use an antistatic strap and observe all static
precautions during this procedure. Failure to do so could result
in damage to the DELHE-UA, host module or device.