Cabletron Systems Ethernet Hubs, Manual

Page: 112 / 125

9030367 E7 Event and Alarm Messages
7-3
Cabletron Ethernet Hub Alarms and Events
00010401
Device {v} of type {v} is
created with an IP address
already used by another model.
00010401
DUPLICATE IP ADDRESS
The model has the same IP
address as that of some other
Model.
00010402
Device {v} of type {v} is
created with a physical (Mac)
address already used by another
model.
00010402
DUPLICATE PHYSICAL ADDRESS
The model has the same Physical
address (Mac address) as that of
some other model.
00010601
Port {v} (Instance ID {v}) on
board in slot {v} (Instance ID
{v}) of {v} (name - {v}) has
segmented.
00010601
A port has changed from
operational to segmented.
00010602
Port {v} (Instance ID {v}) on
board in slot {v} (Instance ID
{v}) of {v} (name - {v}) is no
longer segmented.
00010602
Not Applicable.
00010603
Network configuration change
reported by {v} (name - {v}).
MAU attached to port {v}
(Instance ID {v}) on board in
slot {v} (Instance ID {v}).
00010603
Not Applicable.
00010604
Network configuration change
reported by {v} (name - {v}).
MAU previously attached to port
{v} (Instance ID {v}) on board
in slot {v} (Instance ID {v})
has been removed or powered
down.
00010604
A previously attached MAU has
been removed or powered down.
This trap should only occur for
MIMs that support link state.
00010605
New source address {X 5}
(Instance ID {0 6}) detected by
{t} (name - {m}) on port {I 3}
(Instance ID {0 4}) of board in
slot {I 1} (Instance ID {0 2}).
00010605
Not Applicable.
Table 7-1. Events and Alarms (Continued)
Event Message Probable Cause Message