Cabletron Systems 9E429-36 Technical Manual Download Page 6

Page: 6 / 18

9E428-12/36 and 9E429-12/36 Module Specific Information

Full Duplex Configuration Screen

The 9E428-12/36 and 9E429-12/36 Full Duplex Configuration Screen
(Figure 1), displays the port number, operation mode, link status, and port status
of the module’s ports (12 ports at a time).

Figure 1. 9E428-12/36 and 9E429-12/36 Full Duplex Configuration Screen

SmartSwitch 9000 Local Management

Full Duplex Configuration

Module Name: 9E428-36 Firmware Revision: 01.04.07

Slot Number: 9 BOOTPROM Revision: 01.01.01

PORT# OPERATION MODE LINK STATUS PORT STATUS

1 STANDARD ENET No Link ENABLED

2 STANDARD ENET No Link ENABLED

3 STANDARD ENET No Link ENABLED

4 STANDARD ENET No Link ENABLED

5 STANDARD ENET No Link ENABLED

6 STANDARD ENET No Link ENABLED

7 STANDARD ENET No Link ENABLED

8 STANDARD ENET No Link ENABLED

9 STANDARD ENET No Link ENABLED

10 STANDARD ENET No Link ENABLED

11 STANDARD ENET No Link ENABLED

12 STANDARD ENET No Link ENABLED

SAVE [ 13-24 ] SET ALL PORTS: FULL EXIT RETURN

Summary of Contents for 9E429-36



















Search results

Summary of Contents for 9E429-36

Reviews:

Related manuals for 9E429-36

Brands by name

Popular brands

Cabletron Systems 9E429-36, Technical Manual

Search results

Summary of Contents for 9E429-36

Reviews:

Related manuals for 9E429-36

Brands by name

Popular brands