Cabletron Systems 9E428-36, User Manual

Page: 17 / 36

2-3
Installing the 9E428 and 9E429 Modules
Setting the Module DIP Switch
The DIP switch on the 9E428 and 9E429 Modules (Figure 2-1 and Figure 2-2), is an
eight-switch DIP located near the bottom left corner of the module. Each switch is
set according to the functions described in Table 2-1. If switch settings are
changed, the processor on the module must be reset, using the reset switch or
repowering the module, for changes to take effect.
Figure 2-2. Module DIP Switch location
1 2 3 4 5 6 7 8