Installing the 9E423-36 Module
2-2
Figure 2-1. User Accessible Components
The DIP switch on the 9E423-36 Module (shown in Figure 2-1), is an eight switch
DIP located near the bottom left corner of the module. Each switch is set
according to the functions described in Table 2-1. If switch settings are changed,
the processor on the module must be reset, using the reset switch or by
repowering the module, for the changes to take effect.
SMB1 Prom
DRAM
Simm
Flash
Simm
Boot Prom
Stats Engine
Socket
Dip
Switch
1
2
3
4
5
6
7
8
Summary of Contents for 9E423-36
