Cabletron Systems 3F00-01, User Manual

Page: 52 / 70

Chapter 4: Monitoring and Managing the 3F00-01 and 3F55-01
Page 4-18 FDDI Dual-Attached Intelligent Module User’s Guide
• A value that indicates the connection capabilities of the PORT.
[
fddimibPORTConnectionCapabilities
]
• This variable assumes the value of the
BS_Flag
. [
fddimibPORTBSFlag
]
• The count of the consecutive times the Link Confidence Test (LCT)
has failed during connection management. [
fddimibPORTLCTFailCts
]
• A long term average link error rate. [
fddimibPORTLerEstimate
]
• A link error monitoring count of the times that a link has been rejected.
[
fddimibPORTLemRejectCts
]
• The aggregate link error monitor error count, set to zero only on station
initialization. [
fddimibPORTLemCts
]
• The link error rate estimate at which a link connection will be broken.
[
fddimibPORTLerCutoff
]
• The link error rate estimate at which a link connection will generate an
alarm. [
fddimibPORTLerAlarm
]
• An indication of the connect state of this PORT which is equal to the
value of
Connect_State
. [
fddimibPORTConnectState
]
• The state of this PORT’s PCM state machine. [
fddimibPORTPCMState
]
• The value of
PC_Withhold
. [
fddimibPORTPCWithhold
]
• The condition becomes active when the value of
fddiPORTLerEstimate
is less than or equal to
fddiPORTLerAlarm
. [
fddimibPORTLerFlag
]
• This variable indicates the presence of underlying hardware support
for this PORT object. [
fddimibPORTHardwarePresent
]
• A PORT action to be performed. [
fddimibPORTAction
]
4.2.6 3F00-01/3F55-01 PATH Group
This group applies to SMT version 7.3 only.
• The total number of PATHs possible (across all FDDI ports) on this
unit. [
fddimibPATHNumber
]
• Specifies the minimum time value of
fddiMACTvxValue
that shall be
used by the MAC that is configured in this PATH.
[
fddimibPATHTVXLowerBound
]