manualshive.com logo in svg

Cabletron Systems 3Com PortSwitch Hub, Manual, Page: 60 / 79

Share
Download
Cabletron Systems 3Com PortSwitch Hub Manual Download Page 60

9032295 E2

Application Views

5-15

SNMP Extensions Application

RMON Extensions Host View

This view contains MAC to Port and Port to MAC tables. These tables provide 
cross references between the MAC address of a port and the complete Object 
ID string that refers to that port.

RMON Extensions Event Alarm View

This view contains the Alarm Table and the Event Table. The Alarm Table 
cross references the index number for an alarm with its peak value. The Event 
Table cross references the index number for an event with its action. Double-
click the Event Action field to edit it.

SNMP Extensions Application

This application supports the SNMP-Repeater Configuration View. The model 
type name for this application is 3Com1516ExtApp.

SNMP-Repeater Configuration View

This view contains the following buttons and fields:

Reset
Allows you to reset the repeater. Resetting does not affect the management 
counters or the Administrative State, but it does cause a disruptive Self-Test. 
As a result of this action a Reset trap may be sent. This action may result in 
the loss of packets. Possible values are noReset and reset.

NonDisrupt Test
Selecting selfTest performs an agent-specific, non-disruptive self-test. After 
performing this test the agent will update the repeater health information. If 
a change in the repeater health has occurred, the agent will send a trap. 
Possible values are noSelfTest and selfTest.

Operational Status
Displays the operational state of the repeater. In the case of multiple kinds of 
failures (for example, a repeater failure and a port failure), this value will 
reflect the highest priority failure.

Summary of Contents for 3Com PortSwitch Hub
















































































Reviews:

No comments