Cabletech URZ0408, Owner'S Manual

Page: 14 / 30

Owner’s manual
14
EN
6.TEST/HUSH BUTTON
To test : The green led away on, to test the alarm, press the TEST/HUSH
button , and then red led flashes for three times with horn sound a loud. If
the test operation DO NOT working, please replace a new one and send
for service.
To hush : If the alarm is sounding, you can press the test/hush button to
quickly silent. then it will be silence ,and will be reenergized at 15 minutes
from the time the button is pressed. if the concentration of carbon monoxide
surrounding the alarm remains at 40ppm or greater.
7.TAKING CARE OF YOUR ALARM
You have to maintain the alarm frequently to ensure it working properly. few
tips are provided for you to take care of your alarm.
What you should do:
(1) Test the alarm weekly by pressing the TEST/HUSH button.
(2) Vacuum the alarm cover once a month to remove accumulated dust. Use
the soft brush attachment of your vacuum cleaner, and unplug the alarm
from the electrical outlet before vacuuming.
(3) Instruct children never to touch, unplug or otherwise interfere with the
alarm. warn children of dangers of CO poisoning.
What you should not do:
(1) Never use detergents or solvents to clean the alarm. Chemicals can
permanently damage or temporarily contaminate the sensor.
(2) Avoid spraying air fresheners, hair spray, paint or other aerosols near
the alarm.
(3) Do not paint the alarm. Paint will seal the vents and interfere with proper
sensor operation.
(4) Do not mount the alarm directly above or near a diaper pail, as high
amounts of methane gas can cause temporary readings on the digital
display.
NOTE : if you will be staining or stripping wood floors or furniture, painting,
wall –papering, or using aerosols or adhesives for a DIY project or hobby.
Power
Alarm
Fault
Test/Hush
Buzzer