5
2.1 Windows 98SE Driver Installation
1.
Before you plug the into a USB port, insert the installation CD into your CD-ROM
drive. An auto-installation screen should appear.
2.
To start the installation, click on
Install Windows 98 Driver
.
3.
When the Finish dialog (below) appears, click Ok to complete the installation.
4.
If you are prompted to insert the Windows 98 CD, remove the Cables To Go FlyDrive
Driver CD and insert your Windows 98 CD-ROM and follow instructions on screen to
complete.
5.
Once installation is completed, you will need to reboot your system to activate the
driver.
6.
After the reboot has completed, connect the clear plastic USB connector of Cables To
Go FlyDrive into a USB slot. Windows should detect the FlyDrive Drive and
automatically install the drivers. See note above (section 1.2) for info on the optional
USB connector.
7.
You should now see the FlyDrive in Windows Explorer or My Computer.
