Cables to Go 28652, User Manual

Page: 22 / 30

21
Step 1
Make sure that the HyperTerminal is installed in your system. If not, please go to
Start, Settings, and
Control Panel . Double click Add/Remove Programs , choose Windows Setup Page , Communications ,
click Details button and enable HyperTerminal to install the program to your Window system.
Step 2
Go to
Start, Settings, Control Panel , double click System , and click on Device Manager . Check which
COM port is located by USB to Serial Port.
Step 3
If you have setup HyperTerminal before, please go to
Start,
Programs, Accessories, Communications, HyperTerminal .
Click File and choose Properties . The Properties dialog page will
appear on your screen. If it is your first time to setup
HyperTerminal, you will see the following page during the setup
procedure.
Step 4
Click the Connect using item to indicate the proper COM port, which
appeared in Step 1. Follow the instructions to complete the setup.
S
ETTING
U
P THE
H
YPER
T
ERMINAL WITH
USB
TO
S
ERIAL
P
ORT