v1.0 12/5/11
4
INSTALLATION
1. UNPACKING and HANDLING
Each unit is shipped assembled and factory tested. Ensure that all accessories are removed
from the container before discarding packing material
2. MECHANICAL INSPECTION
Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is
clean, and no connectors are broken, damaged, or loose. If equipment appears to be
damaged or defective please contact your distributor or Cabletronix at 1-610-429-1511 for
assistance.
3. PRODUCT DIAGRAM
4. HARDWARE CONNECTIONS
a. Connect the digital audio source to the Input side of the unit. If a Toslink connection
use the Toslink port. If a coaxial connection use the coaxial port.
b. Connect the unit’s Output side to the analog audio equipment using the RCA Right
and Left connectors.
c. Connect the included 5VDC@2A power supply to the unit’s power connector. Insert
the power supply into an available AC outlet.
Troubleshooting assistance can be found on-line at
www.cabletronix.com
in addition to
support from Cabletronix sales engineers at 1-610-429-1511.
