8
www.cablematters.com
USB-
C™ Docking Station with Dual 4K Displays & 80W PD
3.6 Connecting to an Ethernet Network
1) Connect an RJ45 patch cable to the Dock (Cat 6 recommended for
Gigabit Ethernet)
2) Connect the patch cable to an active LAN or router port
3) Check the documentation of your LAN or router to configure network access
4) Link and Status LEDs should blink to indicate a live connection
Troubleshooting Tips
•
Ethernet network speed is limited to 100-480 Mbps Ethernet when in 4K mode
•
Reboot the computer and check that the Link and Status LEDs are lit
•
Test the patch cable with a different device or try another USB port
Check if your computer recognizes the Dock:
Windows: Search Device Manager > Click on Universal Serial Bus devices > USB-C
Computer Docking Station
1) Connect a USB 2.0 or 3.0 device to the Dock
2) Wait while any needed device drivers are downloaded
3) Use
Safely Remove
or
Eject
to remove the device before unplugging, if needed
Notes
:
•
Front Panel USB 3.1 port supports the USB Gen 2 data transfer rate up to 10 Gbps
and provides fast charging up to 5V/2.1A
•
Rear Panel USB 2.0 ports are designed for 2.4 GHz devices such as a mouse/
keyboard. USB 2.0 offers less interference for wireless connections.
•
Maximum data transfer rate is limited to 480 Mbps (USB 2.0 speed) when the Dock is
switched to 4K mode
3.7 Connecting a USB-A Peripheral Device
R
EAR
P
ANEL
data only
F
RONT
P
ANEL
2.1A c10Gbps
R
EAR
P
ANEL
data only