CE Labs, Inc.
SW204HD Matrix Switch
Installation / Operation Instructions
Unpack the switch and wall power supply from the box. Pick a suitable location and place the switch close to
the equipment to be connected.
Plug the end of the power supply into the power jack on the unit. Connect the wall transformer into an
appropriate wall outlet jack.
Connect the devices to be switched and the TV monitors to the jacks on the back of the SW204HD as shown
above. Component video cables are not supplied with the switch.
On the front of the SW204HD, press the “POWER” button. Two of the channel LEDs will be on.
Press the “OUTPUT 1 SELECT” button to choose the device you wish to see on the monitor connected to
OUTPUT 1. Press the “OUTPUT 2 SELECT” button to choose the device you wish to see on the monitor
connected to OUTPUT 2.
If the unit is to be rack mounted:
1. Remove the four feet from the bottom of the unit.
2. Attach the included rack mount brackets with the screws provided.
3. Position the switch at the desired location in the rack and secure with rack mount screws
(user provided).