CONNECTION METHOD
The audio inputs and outputs can be separately connected to audio
signal connectors of video recorders and multiplexers.
Use the RCA cables for connecting AV equipment to the matrix. Connect
the video and audio connectors of the signal source equipment output
terminals to the same channel connector of the matrix input terminals.
Connect the output of the matrix switch to the input connectors of the
interfaced equipment.
NOTE: The colors at both ends of the various signal cables must corre-
spond to each other, otherwise loss of color reproduction or even no
signal output could occur.
CONTROL COMPUTER CONNECTION
Use the RS-232 cable (supplied) to connect the computer serial port to
the RS-232 communication port of the matrix host. The computer can
then be used to control the matrix after installation of application
software.
Matrix and Computer Connection
REMOTE CONTROL METHODS AND SETTINGS
The matrix provides standard RS-232 and RS-485 serial communication
ports. The matrix switching operation may be controlled locally using the
front panel keys or remotely through the RS-232 or RS-485 serial
communication.
Matrix Switch
RS-232
DCE
Impedance
75 ohms
Video Output
Connector
8 RCA Female Connectors
4 RCA Female Connectors
Signal Strength
2.5Vp-p
Impedance
75 ohms
Audio Signal
Input/Output Connectors
RCA Female Connectors
Signal Type
Stereo, Balanced or Unbalanced
Impedance
Input: l0k-ohms
Output: 100-ohms
Max. Input Level
+19.5dBu
Max. Output Level
+19.5dBu
Control Type
Serial Control Connectors
RS-232, 9-Pin Female D Type Connector
Baud Rate and Protocol
9600bps, no odd or even parity, 8-bit Transmission Address ,
1-bit Stop Address
Serial Control Port Structure TX, RX, GND
Control Procedures
(AV Matrix))
Specifications
Power
100VAC~240VAC, 50/60Hz, International Auto-Switch
Temperature
Storage, Operating Temp: -40°C~+85°C
Humidity
Storage, Operating Humidity: 10%~90%
Housing Measurements
485 mm (L) X 272 mm ( W ) X 140mm (H)
Product Weight
4800g
Median Failure Interval
30,000 Hours
Model
Parameters
SW808HD
SW404HD
Video
Enhancement
0-dB
Bandwidth
1 50MHz (-3dB), Full Load
Max. Transmission Delay
20nS (±1nS)
Switching Speed
50nS (Longest Time)
Signal Type
Component/Composite Video
Video Input
Connector
8 RCA Female Connectors
4 RCA Female Connectors
Signal Strength
1 Vp-p Y Component Video, S-video, Composite Video; 0.3Vp-
p R-Y & B-Y Component Video, S-video
Min./Max. Voltage
Modulated Signal 0.5V~2.0Vp-p
MATRIX SYSTEM TECHNICAL PARAMETERS