Cable Electronics CE Labs SW404HD Instruction Manual Download Page 1

INSTRUCTION MANUAL

High Definition Matrix Switch

SW404HD | SW808HD

CE labs can support many areas of your audio and video

distribution needs.

We manufacture:

 

• Digital Signage software and Media Players

 

• HD Matrix Switchers

 

• RF amplifiers

 

• HDMI and Component HD distribution amplifiers

 

• CAT 5 Signal Extenders

 

• VGA Extenders and Splitters

 

• and cables of all types.

See our full product line at 

www.celabs.net

WARRANTY

Cable Electronics, Inc. warrants this product to be free from defects in 

material and workmanship, under normal use and service, for a period of 

one year from the purchase by the original purchaser. If this product is 

defective or malfunctions, Cable Electronics will replace or repair this unit 

(at their option) within a reasonable time. No expressed or implied warranty

 is made for any defects caused by immersion or exposure to liquids, abuse, 

neglect, improper operation of unit, excess wear and tear and defects 

resulting from unauthorized disassembly and or modification.

Document: 

SW404HD_SW808HD_manual.pdf

3209 Wood Drive

Garland, TX 75041

Phone: (469) 429-9200

Toll free: 

(800) 767-6189

Fax: (469) 429-9205

www.celabs.net

Summary of Contents for CE Labs SW404HD

















Reviews: