Cable AML ITX02-2000, Operation Installation Maintenance Manual

Page: 19 / 26

Indoor Broadband Transmitter – ITX02-2000
14
IM402513-10 Rev –
Diagnostic Connections
Diagnostic connections, not essential to the normal operation of the transmitter, are made at the
front panel of the transmitter.
•
RF Diagnostics - Two RF test point output "N" connectors for Driver RF output and
Transmitter Monitor output are provided on the front panel. The locations in the
circuitry are shown in Figure 5
•
XO and VHF Input Test Points - Crystal oscillator (XO) monitor, VHF input and output
signal test point "F" connectors are provided on the front panel.
VHF IN VHF TEST POINT
MMDS TRANSMITTER DRIVER
RF OUT
REMOTE MONITOR
Cable AML
FUSE 1A
SLO-BLO
AC INPUT
120 VAC or
240 VAC
50/60 Hz
Figure 8. Driver Chassis Front And Rear Panels.