Page 3
►
Instructions:
A
Figure 1
1.
Place the face frame
(A)
face down on a flat soft working surface to
ensure that the face is
not scratched or damaged.
(Figure 1)
2.
Installing the Side Panels:
Insert left side panel
(B1)
and right side panel
(B2)
into the
grooves of the face frame
(A)
and align the cam lock connectors.
(Figure 2)
Lock
the cam locks with a
scre
w
driver by turning the screw 180° clockwise.
(Figure 3)
3.
Installing the Bottom Panel:
Gently spread the side panels and insert the bottom panel
(C)
into the grooves of side panels
(B1,B2)
until it is fully seated into the groove
of the face frame
(A).
B2
Figure 2
C
B2
B1
Figure 4
B1
Figure 3
A
4. Installing the Rear Side Panels (Figure 5)
: Insert rear left side panel
(E1)
and right side panel
(E2)
into the grooves of the side panels
(B1,B2)
aligning side panels & bottom panel with rear side panels.
Lock each cam lock connector with a screwdriver by turning the screw.
(Figure 3)
E2
E1
C
B2
B1
Figure 5
A
A