CABINETS TO GO B.JORGSEN & CO SB24 Assembly Instructions Download Page 3

Page: 3 / 4

►

Instructions:

1. Place the face frame

（

）

face down on a flat soft working surface to ensure that the face is not scratched or damaged.

figure1

figure2

figure3

Installing the side panels (Figure2)

: Insert the left and right panels(B) into the grooves of the face frame (A) and align

the Cam lock connectors.Lock the cam with a screwdriver by turning the screw 180

clock wise.

Installing the bottom panel(Figure3)

:Gently spread the side panels and insert the bottom (C) into the grooves of the

side panels until it touches the face frame (A).Align it and lock each cam.

Installing the back panel and Toe Kick(Figure4)

: Put the back panel at rear of the side panels.Align and lock each cam

lock.Installing the Toe Kick by locking the cam lock at both ends.

Figure4

Attach hinges and door panels to the face frame with 2PCS 4*14 flat head screws and 1PC 4*21 round head

screw(Figure5)

Figure5

Page3

Summary of Contents for B.JORGSEN & CO SB24

Page 1: ...Base Cabinet Vanity Sink Base Cabinet ASSEMBLY INSTRUCTIONS These assembly instructions are applicable for all Sink Base Cabinet and Vanity Sink Base Cabinet ITEM SB24 SB27 SB30 SB33 SB36 VSB24 VSB30...

Page 2: ...nd or injury Before the assembly begins check that all appropriate and required plumbing and electrical connections exist Before drilling make absolutely sure that there are no pipes gas water electri...

Page 3: ...the screw 180 clock wise 3 Installing the bottom panel Figure3 Gently spread the side panels and insert the bottom C into the grooves of the side panels until it touches the face frame A Align it and...

Page 4: ...e chrome cleaner on chrome plated or brass trim hinges handles sockets etc Good ventilation is essential for maintaining the quality and look of this furniture Warranty and Customer Care Information F...