ASSEMBLY INSTRUCTIONS
Page 4
TAKE-DOWN INSTRUCTIONS
1. Close all windows. Leave one or both doors open
to allow air to escape.
2. Remove all ropes and ice anchors and store them
in the provided pouch. In windy conditions, remove
ice anchors after collapsing the roof and walls.
3. Push the center hub on any wall until it collapses
inward
(Photo 6).
Continue pushing each wall
inward until all the walls are collapsed. The shelter
will fall to the ice on its own.
4. Push the hub of the roof panels inward until they
both collapse.
6. Your shelter should be standing up completely
(Photo 5).
Anchor the shelter to the ice by
using the provided ice anchors and rope.
Screw two or more ice anchors into the ice several
feet away from the shelter using Clam’s Ice Anchor
Installation Tool PN 8348 (not included). Use the
provided ropes to tie the hub eyelets to an anchor,
and the adjustment slides on the rope to achieve
proper tension.
Next, screw two or more anchors
through the windward corners & side shelter
grommets completely. This will help keep the
shelter in place. If more anchors are needed,
order PN 102457.
5. The shelter will now be flat. Gather all corners of
the shelter and fold together
(Photo 7).
Do NOT
force the shelter when folding! Watch for
entanglement of poles
(Photo 8)
.
6. Place the folded shelter and the ice anchor/rope
pouch back into the carrying case with the hubs
toward the bottom end of the bag
Photo 5
TAKE-DOWN INSTRUCTIONS
Photo 6
Photo 7
Tangled
Untangled
Photo 8
Instruction Part # 102882
Summary of Contents for Ice Team 8434
Page 5: ......
