Cabela's 34EGGBP, Instruction Manual

Page: 3 / 20

You must rst install the battery which is located in the front protective styrofoam.
Batteries included: E-lock (1x9Volt)
To replace the battery, remove the cover by pressing the tab and
turning as shown in the illustration (counter clockwise). Install
new battery and align cover and install cover (clockwise).
2
BATTERY INSTALLATION AND REPLACEMENT
OPENING THE SAFE
Enter Factory Pass Code : 1 - 5 - 9 - #
OPENING THE SAFE
SETTING THE PASSCODE & PASSCODE RESET
After opening the safe, locate the small red button on the inside
of the door, near the hinge. Remove the cap and press the red
button until you hear a beep.
Before closing door, make sure your new passcode is
functional.
Electronic Lock
You will see a yellow light on the front faceplate.
Enter your new passcode (minimum of 3, to a maximum of 8
digits) while the yellow light is illuminated, then press #.
Back up key
Remove the cover by pressing the tab and turning the cover
under battery installation.
Insert the key in the key hole and turn key ¼ turn (until topped)
to unlock the safe. Rotate the handle and open the door.
E-LOCK
TAB