QUICK SOLUTIONS GUIDE
Here is an overview of the most quick solutions. For any
further questions, please contact your Cabasse dealer,
or contact us at http://www.cabasse.com/support/
service-apres-vente/
No power (battery).
1.Battery may be in safe mode or discharged.
2.Volume set to "Zero" (please refer to mobile device
instructions).
No sound.
1.Increase the volume on the speaker by pressing the
button, and check the volume of your device
or music source.
2.Use a different cable.
3.If the jack is incorrectly connected or faulty, check the
connection between the mobile device and SWELL.
Change the analog cable if necessary.
4.The circuit of the integrated amplifier has been
triggered into safe mode (due to excessive temperatures
or overload). Reduce the volume and prevent the device
from overheating.
Sound reproduction too soft.
1.Increase the volume on SWELL using the volume
button "+".
2.Increase the volume on the mobile device.
No sound or distorted sound via Bluetooth
wireless connection.
1.Connect the mobile device as indicated in the "Blue-
tooth Technology" section of this notice.
2.The mobile device could not connect automatically and
must be connected manually.
3.Make sure that any sources that could cause distur-
bance (e.g. WiFi, router) are not too close to SWELL or the
mobile device.
4.It is often not possible to have interference free,
simultaneous operation of a WiFi and a Bluetooth
connection on a mobile device. Deactivate WiFi on your
mobile device.
5.If you are out of range of SWELL, reduce the distance
between SWELL and the mobile device (max 10m).
The bluetooth connection between the mobile
device and SWELL was unexpectedly interrupted.
1.If a previously connected NFC mobile device is brought
too close to the right side of SWELL, the Bluetooth
connection is terminated. To reconnect, simply approach
the mobile device close to the NFC sensor again.
2.Select the Bluetooth input and wait for SWELL to
activate the connection.
3.SWELL automatically switches off after 5 minutes of
inactivity (battery operation) or 60 minutes (AC power). /
Set the volume of your mobile device to minimum (mute)
to prevent SWELL from switching off automatically.
Playback distorted.
1.Reduce the volume if the volume is too high.
2.Reduce the output level of your mobile device. The AUX
input is overdriven (only in AUX mode). The maximum
level of AUX input is 1.2 Vrms.
NFC connection failure.
1.Verify the NFC function is activated on your mobile
device.
2.The NFC antenna of your mobile device is beyond the
range of SWELL. The NFC of your mobile needs to be
centered on the right side of SWELL. The antenna position
of the mobile device is often marked with the NFC logo.
3.Before confirming the connection on your mobile
device, move it away from SWELL. Repeat the process as
necessary until connection.
TROUBLESHOOTING
Your mobile device does not connect to SWELL
automatically.
1.Verify the Bluetooth function is activated on your
mobile device.
2.If SWELL has been deleted from the Bluetooth menu
of your mobile device, pair SWELL again to your mobile
device.
3.The AUX input has been selected on SWELL. Select
Bluetooth input and wait for SWELL to activate the
connection.
4.5 or more mobile devices have been connected to
SWELL since last use. Pair SWELL again to your mobile
device.
True Wireless pairing has failed.
1.Disconnect all the Bluetooth connections between the
mobile device(s), SWELL A and SWELL B. Repeat the True
Wireless pairing process.
2.Press the Bluetooth button and the volume button at
the same time.
3.Terminate the connection to at least one of the two
mobile devices.
4.If the distance between the two SWELL speakers is too
far, reduce the distance to less than 10 m.
5.Select the Bluetooth input on both SWELL speakers
before starting the process.
6.One of the two SWELL speakers is already connected to
a third SWELL via a True Wireless connection. Terminate
the true Wireless connection between the two SWELL
speakers as according to the instructions. Re-start the
connection process with the two chosen SWELL speakers
as according to instructions.
7.You have pressed the same button combination on
both SWELL speakers. Repeat the pairing process exactly
as indicated in the instructions.
One or both SWELL speakers do not play the
desired channels (L,R,I+R).
1.By default, SWELL A plays the left and SWELL B plays the
right music channel once the connection has been made.
Change the True Wireless mode as per instructions.
In True Wireless mode, both SWELL speakers do
not connect with each other after being switched
off.
1.Always wait 20 seconds between switching the first and
second SWELL speaker.
2.Terminate the connection to at least one of the mobile
devices.
3.Reduce the distance between the two SWELL speakers.
You have cancelled true Wireless mode on one
SWELL by pressing the Bleutooth and Mute
buttons.
1. Set up a new connection between the two SWELL
speakers as per instructions.
2.You have selected the AUX input on both SWELL spea-
kers. Select the Bluetooth input on at least one SWELL.
The AUX input cannot be selected.
1.The SWELL is connected via True Wireless to a second
SWELL which already has the AUX input selected. Only
select the AUX input on the SWELL that you wish to
connect to the mobile device. The Bluetooth input must
be selected on the second SWELL. Alternatively, cancel
True Wireless as according to instructions.
SWELL switches off by itself.
1.The battery is completely discharged. Charge the
battery.
2.SWELL was automatically powered off (5 minutes in
battery operation, 1 hour in AC power). Provide SWELL
with a sound source and switch the SWELL to Mute to
avoid it switching off.
3.Room temperature is lower than 0°C or higher than 35°
C. SWELL should only be charged at moderate tempera-
tures (see safety instructions).
4.You are not using the original power supply unit. Only
use the original power supply unit. If this gets lost, please
contact our Customer service.
5.If the internal battery and/or the power supply unit are
faulty, please contact Cabasse Customer service.
16
17
Summary of Contents for SWELL
Page 1: ...SWELL Owner s manual ...
