Customer Care Australia P: 133 122 F: 1300 303 310 E: [email protected] W: cabac.com.au
A: 8 Distribution Pl, Seven Hills NSW 2147
Customer Care New Zealand P: 8 0077 6969 F: 8 0088 6969 E: [email protected] W: cabac.co.nz
20
20 of 21
Load configuration reference
UPS (VA) = PC power ATX (Watt) /0.6 + Monitor (VA)
Monitor power ( reference )
15”CRT
15”LCD
17”CRT
17”LCD
19”CRT
19”LCD
80VA
40VA
130VA
60VA
180VA
80VA
21 of 21
Troubleshooting
Problem
Possible Cause
Action To Take
UPS not on &
No LED’s on
i. Battery Discharged. Sleep
Mode.
Press the POWER button ON
ii. PCB failure
Contact Service Agent
UPS always at battery
mode
Power cord lose
Re-‐plug the power cord
Line voltage too high, too
low or black out
Normal condition
PCB failure
Contact Service Agent
sBuzzer continuously
sounding
i. Short Circuit.
Remove the non-‐critical loads
ii. UPS Faulty
Contact Service Agent
UPS does not provide
expected run time. Low
battery warning is
sounded prematurely.
Battery is weak due to wear
or successive mains
outages.
Allow UPS to recharge battery
for a minimum of 8 hours. If UPS
sounds low battery warning
prematurely, when retested,
battery should be replaced.
