8
8
2
Installation
2.1
Unpacking
Check stacker for damage which may have occurred during transport.
Check delivery for completeness.
Contents of delivery:
•
Stacker with cutter
•
Base frame
•
Documentation
i
Note!
Please keep the original packaging in case the printer must be returned.
!
Attention!
The device and printing materials will be damaged by moisture and wetness.
Set up label printer with stacker only in dry locations protected from splash water.
2.2
Preparing the Printer
1
2
3
4
6
5
Figure 5
Preparing the printer
Loosen screw (2) and remove cover (1).
Loosen screws (4) and remove cover (3).
Loosen screw (5) a few turns and remove tear-off or peel-off plate (6).