8
8
4.3 Automatic Mode
•
Switch is in upper position.
•
Key in the Present Sensor is disabled.
The LED on the key is permanently red.
1. Insert transfer ribbon and labels
Operator's Manual Hermes C.
2. Switch on the printer.
3. Send a print job.
A label will be printed and transported the peel position. The reflective
sensor in the PS11 detects the label and interrupts the transport until the
label will be removed.
4. Remove the label from the peel position.
The next label will be fed back to the printhead for the secondary color,
printed and transported to the peel position.
4.4 Label on Demand Mode
•
Switch is in lower position.
•
LED in the key is green when a label can be printed and peeled-off.
Otherwise the LED is red.
1. Insert transfer ribbon and labels
Operator's Manual Hermes C.
2. Switch on the printer.
3. Send a print job.
4. Press the key when the LED is green.
The LED changes to red. A label will be printed and transported the peel
position. The reflective sensor in the PS11 detects the label and interrupts
the transport until the label will be removed.
5. Remove the label from the peel position.
The next label will be fed back to the printhead for the secondary color.
When the LED changes to green the system is ready for the next cycle.
