background image

2

2

Family

Type

HS/VS

HS 60

HS 120

-

HS 60+

HS 120+

HS 180+

VS 60

VS 120

-

VS 60+

VS 120+

VS 180+

Edition:

 02/2016 - Part No. 9009292

Copyright

This documentation as well as translation hereof are property of cab Produkttechnik GmbH & 
Co. KG. 

The replication, conversion, duplication or divulgement of the whole manual or parts of it for 
other intentions than its original intended purpose demand the previous written authorization by 
cab.

Editor

Regarding questions or comments please contact cab Produkttechnik GmbH & Co. KG.

Topicality

Due to the constant further development of our products discrepancies between documentation 
and product can occur.

Please check www.cab.de for the latest update. 

Terms and conditions

Deliveries and performances are effected under the General conditions of sale of cab. 

Operator's Manual 
- Translation of the Original Version - 
for the following products

Germany

cab Produkttechnik  
GmbH & Co KG

Postfach 1904 
D-76007 Karlsruhe 
Wilhelm-Schickard-Str. 14 
D-76131 Karlsruhe

T49 721 6626-0 
T49 721 6626-249

www.cab.de 
[email protected]

France

cab technologies s.a.r.l. 
F-67350 Niedermodern 
Téléphone +33 388 722 501

www.cab.de/fr 
[email protected]

USA

cab Technology Inc. 
Tyngsboro MA, 01879 
Phone +1 978 649 0293

www.cab.de/us 
[email protected]

Asia 

cab Technology Co., Ltd. 

 

Junghe, Taipei, Taiwan 
Phone +886 2 8227 3966

www.cab.de/tw 
[email protected]

China 

cab (Shanghai)Trading Co., Ltd. 

 

Phone +86 21 6236-3161

www.cab.de/cn 
[email protected]

Representatives in other countries on request

Summary of Contents for HS Series



















Reviews: