CAB eos 1 Configuration Manual Download

Page: 36 / 48

Service Functions

6.3

Save Settings



Access only with storage device defined as

Default storage

With the

Save settings

function the printer configuration can be saved to a storage device (USB flash drive,

Internal Flash File System). The configuration will be saved as XML file in the folder \MISC of the storage device. The

current date is used as file name YYYYMMDD.XML (e.g. 20130104.XML for a file saved on 01-04-2013).
1. If the printer configuration should be saved to an USB flash drive, select

USB Memory

Default Storage

and insert USB flash drive into a USB master interface.

If the printer configuration should be saved on the Internal Flash File System, select

IFFS

Default

Storage

2. Start Offline menu.
3. Select

Service

If the menu is protected via a PIN a prompt appears in the display. Enter the code number and confirm with

4. Select

Save settings

5. Saving of the configuration data starts. When the entire saving procedure is complete the name of the created file

appears in the display.

6. Confirm with

The printer returns to the

Service

menu.

An error message appearing during the saving procedure may be caused by an unreadable medium (e.g. unknown

medium, unformatted USB flash drive)



"9.5.3" on page 44.

6.4

Default Settings

Access only with service key inserted!

With the

Default settings

function all setup parameters excepting the passwords



page 21 can be reset to the

default values.
1.  Insert service key into an USB master interface.
2.  Start Offline menu.
3.  Select the

Service

menu.

4. Select

Default setting.

The display shows

Set to factory defaults?

5. Confirm with

The setup parameters will be reset and printer returns to the

Service

menu.

Summary of Contents for eos 1

















































Search results

Summary of Contents for eos 1

Reviews:

Related manuals for eos 1

Brands by name

Popular brands

CAB eos 1, Configuration Manual

Search results

Summary of Contents for eos 1

Reviews:

Related manuals for eos 1

Brands by name

Popular brands