18
18
5 Maintenance
8. Remove spring (6) and lineal blade (12).
9. Insert the axle of the (new) lineal blade withe the washer (B) in the bearing
(10) of the mounting plate.
10. Hang in the slack spring (6) to the pins of the mounting plate (9) and the
lineal blade (11).
5 6
7
2
8
9
10
11
12
13 14 15
2
11
A
B
C
11. Turn the lineal blade (11) backwards. The spring (6) gets tense.
12. Insert the Axle of the (new) circular blade (2) with the washer (A) in the
bearing (5) of the mounting plate.
13. Place the washer (C) on the axle of the lineal blade.
14. Hang in the slack spring (13) to the pins (12,14) of the lineal blade and the
bearing plate.
15. Push the bearing plate (15) onto the blade axles (2, 11). The spring (13)
gets tense.
16.
Append the bearing plate (15) to the profile (7) using the screws (8).
17.
Attend on an accurate position of the bearing plate (15) to the profile (7) of
the cutter and tighten the screws (8).
18. Tighten the set screw (4) at the gear wheel.
19. Lubricate the circular blade
5.1 on page 15 and adjust its initial state
5.3 on page 19.
20. Re-mount the cover sheets
5.1 on page 15.
