A-1
cab Produkttechnik GmbH & Co KG
A3-2 / A3 / A4 / A6
Appendix A - Operation in Peel-off Mode
Components for the Peel-off Mode
The
P-version
printer types
are specificly developed for operation in the peel-
off mode and they are equipped with dispense plate (
8
) as standard.
Additionally an optional present sensor (
3
), peel-off adapter or applicator is
needed.
In the peel-off mode the labels are removed from the silicon liner immediately
after printing, and then available in a dispense position (
4
) ready for further
processing. For example the see-through present sensor consisting of
transmitter (
1
) and receiver (
2
) indicates the presence of a label, and pauses
the printing process until the label is removed. After taking the label from the
dispense position the next label will be printed.
To guarantee a maximum of reliability in the peel-off mode the printer is
additionally equipped with a pair of rollers (
5,6
) to cause the dispense tension.
Appendix A - Operation in Peel-off Mode
Fig. A-1 Components for Peel-off Mode
1
2
3
4
5
6
7
Summary of Contents for a3-2
Page 1: ...Edition 10 04 Thermal direct Printer Transfer Printer Operator s Manual...
Page 77: ...77 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 A B D C E F 9 Test Options Fig 9l Status Print...
Page 83: ...83 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 9 Test Options Fig 9o Printhead Profile...
Page 87: ...87 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 9 Test Options Fig 9s Test Grid...
