128
cab Produkttechnik GmbH & Co KG
128
PRODUCT MARKING AND BARCODE IDENTIFICATION
Hermes
Apollo
A-series
This
function is
available
for:
[TABLE OF CONTENTS] [COMMAND LIST]
M-series
B - Barcode
UPC-E0
Barcode type:
UPC-E0
Length:
fixed - 8 characters *
Valid characters:
numeric
check digits:
yes (Mod 16)
ratio oriented:
yes
UPC-E0 is a numerical barcode with 8 characters. The 8th character is the check
digit. The check digit is calculated automatically by the printer.
Invalid characters are converted into zeroes.
* A zero suppression converts the barcode into a more compact version. This
offers the possibility to key in up to 12 characters which are compressed into 6
characters by the printer. Inthis case the first character must be zero !!
Detailed information is available by the UCC, Inc ( Uniform Code Council, Inc.)
B[:Name;]x,y,r,UPCE0,height,ne;text
CR
[+options] = +WSarea,
White Space area prints quiet zone markers around the bar
code, to make sure that the barcode can be read after printing.
This option is for design purposes only and should be removed
after the label is programmed.
+BARS,
Prints boundary lines above and below the barcode.
Height and narrow element (ne) can be replaced by an SC
value(see example on the next page)
SCx,
sets the size of the barcode to a defined standard code size.
x is a numeric value (0-9) and the possible barcode size
depends on the printer´s resolution. Used instead of height and
ne (narrow element)
Syntax:
