14
14
5.2
Tools
Screwdriver with parallel blade
2.5
To adjust the throttle valves
Product sensor
Hexagon key L-wrench
0.8
To adjust the sensors
(in delivery state of the applicator)
2.5
or matched norm parts
(in delivery state of the applicator))
4
Pad adjustments
Changing pad
Fllat-round nose - straight
- angled
Mount/Dismount of tubes
Open spanner
SW 8
Changing the throttle valves
SW 13
Setting the spring power on the
adapter bolt
SW20
Changing the cylinder
Manometer
± 7 bar Air pressure control
Table 4
Tools
5.3
Mounting and dismounting the cover
To initiate the applicator or for adjustments it is necessary to dismount the cover (2).
After these adjustments have been completed remount the cover.
!
Warning!
Do not operate the applicator without cover (2).
Dismount the cover only for service and/or adjustment purposes.
2
3
1
Dismount
1. Loosen screw (3).
2. Lift cover (2) upwards until the cylinder assembly
has been cleared.
Mount
3. Guide the cylinder (1) into the hole in the top of the
cover (2) .
4.
Tighten screw (3) to fix cover (2) to the applicator.
Fig. 8
Cover