6
6
2
Product Description
2.1
Important Features
•
The supporting air, the vacuum as well as the speed of the cylinder are adjustable. That way the applicator can be
adapted to different label materials and sizes.
•
To avoid contamination within the vacuum channels, tamps are cleaned by an air pressure pulses after each
application.
•
For operation within a system the I/O interface of the printer can be used.
2.2
Technical Data
Label transfer method
Tamp pad
Tamp pad
with foam
Tamp pad
with label stop
Blow pad
4214 L/R 11 F
4214 L/R 12 F
4214 L/R 61 F
4214 L/R 2100
Label width
in mm for
HERMES Q2 / 2
4 - 58
10 - 58
10 - 58
10 - 58
HERMES Q4 / 4
10 - 80
10 - 80
10 - 80
10 - 80
Label height
in mm for
HERMES Q2 / 2
4 - 40
4 - 40
4 - 40
10 - 40
HERMES Q4 / 4
8 - 40
8 - 40
8 - 40
10 - 40
Compressed air pressure
0,45 MPa (4,5 bar)
Sound pressure level
unter 74 dB(A)
Product during
labeling
fixed
¢
¢
¢
¢
in motion
-
-
-
¢
Labeling onto the
product
from the top
¢
¢
¢
¢
from below
¢
¢
¢
¢
sideways
¢
¢
¢
¢
Product height
fixed
-
-
-
¢
variable
¢
¢
¢
-
Horizontal swing angle 90°, 180°, 0°
¢
¢
¢
¢
Product distance to lower edge
at cylinder stroke
200 mm up to mm
135
135
135
140
300 mm up to mm
235
235
235
240
400 mm up to mm
335
335
335
340
Immersion depth pad F
2)
up to mm
65
65
65
-
Cycle time about frequency/min.
1)
25
25
25
25
Table 1
Technical Data
1)
Determined at 100 mm stroke below device / smallest label height / print speed 100 mm/s.
2)
Immersion depth at applicator >25 mm, the cover of the HERMES Q /
must be modified.