6
6
2
Product Description
2.1
Important Features
•
The supporting air and the vacuum as well as the speed of the cylinder are adjustable. That way the applicator
can be adapted to different label materials and sizes.
•
To avoid contamination within the vacuum channels they are cleaned by air pressure pulses at the end of each
application.
•
For operation in a system the I/O interface of the printer can be used.
2.2
Technical Data
Label transfer mode
Tamp pad
Spring loaded tamp pad
Blow pad
3014/16 L/R 1100
3014/16 L/R 3100
3014/16 L/R 2100
Label width
in mm for
HERMES Q4 / 4
25 - 114
80 - 114
25 - 114
HERMES Q6 / 6
25 - 174
80 - 174
-
Label height
in mm for
HERMES Q4 / 4
8 - 250
80 - 250
10 - 100
HERMES Q6 / 6
25 - 250
80 - 250
25 - 100
Compressed air pressure
0,45 MPa (4,5 bar)
Sound pressure level
under 74 dB(A)
Product during
labeling
fixed
¢
in motion
¢
Labeling onto the
product
from the top
¢
sideways
¢
from the front
¢
from the back
¢
Product height
variable
¢
Length of swing lever
2)
mm
200/300/400
Swing angle
0 - 90°
Cycle time about frequency/min.
1)
15
Table 1
Technical Data
1)
Determined with 100 mm lever length / label height / print speed 100 mm/sec.
2)
Length of swing lever: achievable labeling position of 90° (bottom edge of label) below the ground.