5. Operation Controls and Functions
5.1 Transmitter Panel
DC 24V
DC 24V/1A power input port.
Note that the extender supports POC function, it means that either
Transmitter or Receiver is connected to 24V/1A power supply, the other
doesn’t need power supply.
RJ45 connector for connecting the HDBT IN port of the
Receiver with CAT5e/6 cable.
HDBT OUT
Firmware update port.
4 / 8
Function Description
Name
Power LED The red LED is on when the Transmitter is powered on.
EDID DIP
switch
Used for audio EDID setting (dial to COPY by default).
COPY: Copy the EDID of the HDMI OUT port of Receiver.
STD: Default 1080P 2CH
SERVICE
No.
1
2
3
Data Signal
Indicator
(Orange)
▪ Illuminating: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
5
4
7
Link Signal
Indicator
(Green)
6
▪ Illuminating: Transmitter
and Receiver are in good connection
status.
▪ Flashing: Transmitter and Receiver are in poor connection
status.
▪ Dark: Transmitter and Receiver are not connected.
COPY
STD
SERVICE
EDID
PWR
DC 24V
HDBT OUT
HDMI IN
ARC
SPDIF OUT
IR IN
IR OUT
RS-232
1
3
2
4
5
8
9
11
6
7
12
10
HDMI IN
HDMI signal input port. Connect to HDMI source device with
HDMI cable.
8
