C3 SWM4220 Manual Download Page 2

While 

L4, L3

 or 

L2

 is displayed, press the 

Level 

Selection

 button to change the brightness of the 

flames from the available options: 3- High,  
2- Medium and 1- Low.
When the dynamic color rotation is selected and 

L1

 is displayed, pressing the 

Level Selection

 button 

will change the color transition speed. Three speed 
options are available: 1- Slow, 2- Medium, 3- Fast.

      Heat Control

Pressing the 

Heat Control

 button once turns the 

heater 

ON

 and 

OFF

.

With the Heat 

ON

 and set temperature displayed, 

press the 

Level Selection

 multiple times to cycle 

through the 11 temperature settings: 82°F, ON,  
64°F, 66°F, 68°F, 70°F, 72°F, 74°F, 76°F, 78°F, 80°F 
(27°F, ON, 18°C, 19°C, 20°C, 21°C, 22°C, 23°C,  24°C, 
25°C, 26°C).

ON

 means the heater will work continuously.

Changing the temperature unit

 (°C        °F):

With Heat 

ON

 and display showing the set 

temperature, press and hold the 

Power ON/OFF

 

button on the touchscreen for 5 seconds. The 
display will flash 3 times and units will switch from 
°F to °C or °C to °F.

!

 

NOTE: 

This can only be done through the 

touchscreen controls.

Heater Enable & Disable Function:

From the touchscreen controls touch and hold 
the 

Heat Control 

icon for 10 seconds. The ember 

bed will flash six times to indicate that the heater 
function is disabled. When the 

Heat Control

 button 

is pressed while the heat is disabled, the ember bed 
will flash but the heater will not operate.
To enable the heater again, touch and hold the 

Heat 

Control button

 for 10 seconds. After the ember bed 

flashes for a second time, heat function is restored.

!

 

NOTE: 

This cannot be set with the remote control.

 

Timer Control

The 

Timer Control 

button is used to activate or 

deactivate the sleep timer.
Pressing the 

Timer Control

 turns the timer

 ON

 and 

‘8h’ appears on the display. Pressing the 

Timer 

Control

 button a second time within 10 seconds will 

turn the timer 

OFF

. To set the timer, use the 

Level 

Selection

 control to select the desired time from 

the following: 8h, 1h, 2h, 3h, 4h, 5h, 6h, 7h.
The fireplace will shut off after the selected time 
period. Switching the fireplace 

OFF

 with the 

Power 

ON/OFF

 will clear any timer setting.

1

2

3

4

5

6

7

1

2

3

4

5

6

8

       Ember Bed

The 

Ember Bed

 button is used to change the ember 

bed colors by cycling through the available solid 
color options ‘d8’ through ‘d2’ and the dynamic color 
rotation option ‘d1’.
When the 

Level Section

 is pressed while ‘d1’ is 

displayed, the color rotation speed will change: 
‘1‘– Low, ‘2’– Medium, ‘3’- Fast. With ‘d8’ through ‘d2’ 
displayed, the 

Level Selection

 button will adjust the 

brightness of the ember bed from 3- High, 
2- Medium, and 1- Low.

       Level Selection

The 

Level Selection

 button is used to adjust the heat 

setting, as well flame and ember bed brightness, 
color crotation speed and timer setting. See relevant 
section for more details.

 

     Backlight Control

Press the 

Backlight Control

 to turn

 ON

 the 

backlights. Pressing multiple times on this control to 
cycle through different backlight colors or to turn the 
backlights 

OFF

1

2

3

4

5

6

7

1

2

3

4

5

6

8

1

2

3

4

5

6

7

1

2

3

4

5

6

8

1

2

3

4

5

6

7

1

2

3

4

5

6

8

1

2

3

4

5

6

7

1

2

3

4

5

6

8

Button Press

Flame Color

Display Value

1st Press

Red & Yellow

F4

2nd Press

Blue

F3

3rd Press

Red, Yellow & Blue 

F2

4th Press

Color Rotation

F1

5th Press

OFF

NONE

When the 

Level Section

 button is pressed, while F4, 

F3, or F2 is displayed, the light brightness cycles 
through: 3- High, 2-Medium and 1-Low. When set 
in dynamic color rotation mode, pressing the 

Level 

Selection

 button will cycle through different color 

change speeds: 1– Low, 2– Medium, 3- Fast.

!

 

NOTE: 

The backlights can only be operated from 

the remote control.

www.c3furnishings.com

Reviews: