Mode Button
Press the
Mode Button
to cycle through Heat,
Timer or Flame Brightness set mode.
Heat Set Mode
When active press
Up or Down Button
to set
temperature from 59°F (15°C) to 86°F (30°C),
ON and OF. ‘ON’ means the heater operates
continuously. ‘OF’ (OFF) means only the fan will
operate the heater will be off.
! NOTE:
When the heat is turned off, the heating
element will shut down first then the fan after
20 seconds.
Changing the Temperature Unit (°F °C):
Press and hold the
Mode Button
on the
fireplace for 3 seconds to change the displayed
temperature units.
! NOTE:
This function cannot be set with the
remote control.
Timer Set Mode
When timer mode is activated 0.0 appears on
the display and the timer indcator light is lit
yellow. Press
Up/Down Button
to set the sleep
timer by scrolling through the following:
0.0 (off), 0.5 (30 min), 1.0 (1h), 1.5, 2.0, 2.5 ...9.0.
The fireplace shuts off after the selected time
period. Switching the fireplace off with the
Power Button clears any timer setting.
Flame Brightness Set Mode
When set in this mode, use the Up and Down
Buttons to select from the available 6 options:
F0 (no flames), F1, F2, F3, F4 and F5 (the
brightest flames and ember bed).
UP/DOWN Buttons
These buttons are used to adjust heater, timer
and flame settings.
Child Lock Enable & Disable:
When the fireplace is ON, press and hold the
Power ON/OFF Button
on the fireplace for 10
seconds. Three beeps and flashing ‘E3’ indicate
that the Child Lock function is activated. The
Mode, Up or Down buttons will not operate and
‘E3’ will be displayed when pressed. The power
ON/OFF button will also not operate, but only
beeps will indicate that the child lock has been
activated.
To disable the Child Lock, again press and hold
the
Power ON/OFF Button
for 10 seconds.
! NOTE:
This function can only be done through
the fireplace controls, not using the remote
control.
