Copyright © 2006-2014 Shenzhen C2S Technology Co., Ltd. All rights reserved.
115: Different rate, default=100.
15000: Mileage. Default as 0 Meter
3.4 Tracking parameter setting:
By following SMS command to setup device data update interval in Moving/Static:
*1234*E:1,30,180#
<Tracking parameter configuration>
1: Monitoring mode. Define position data update by moving/Static.
30: Position update interval, 30Seconds when in moving.
180: Position update interval, 180seconds when in static
Default setting: 1,30,30. <Update interval cannot less than 10seconds>
3.5 Tracking location by SMS command
TR-11E can track location by SMS commands.
Check details as:
-
Query vehicle status:
SMS command:
*1234*X#
Device reply:
<Unarmed; Engine:On/Off; Door:Off/On;LAC:xxxxxx;CID:xxxxx;Signal Strength:xx
$GPRMC,xxxxxx.xxx,A,xxxx.xxxx,N,xxxxx.xxxx,E,x.x,xxx.x, xxxxxx,,,A*xx >
-
Query GPRMC data:
SMS command:
*1234*GPS#
Device reply:
<$GPRMC,063231.00,A,2232.64712,N,11355.45466,E,0.581,195.93,050811,,,A*6C>
-
Query Google map Position Link:
SMS command:
*1234*P#
Device reply:
<2011-12-08 12:32:13,V,60Km/H,Heading:60,LAC:2638,CID:0ECF;
http://maps.google.com/maps?hl=en&q=22.537222,114.020948>
3.6 Recover factory setting
By SMS command or GPRS command, TR-11E can be initialized to be factory default setting
status.
SMS Command:
*1234*V#
3.7 Remote reboot
By SMS command <
*1234*Z#>
user can reboot TR-11E wirelessly.
3.8 Alarm Alerts
TR-11E only provide two type alarm alerts. See:
-
Power tamper alarm alert < Disconnect TR-11E external power to trigger>
-
Panic(SOS) alarm alert <By press panic button to trigger>
3.9 OTA Operation:
