C2R 30-005, User Manual

Page: 78 / 183

Colibri serie 6 : User’s guide
© 2000-2012 C2R Technologie, Sarl. All rights reserved.
78 78
Rev. A
Default = 0, Maximum Default = 48.
Code 39 Append
This function allows the imager to append the data from several Code 39 bar codes together
before transmitting them to the host computer. When this function is enabled, the imager
stores those Code 39 bar codes that start with a space (excluding the start and stop symbols),
and does not immediately transmit the data. The imager stores the data in the order in which
the bar codes are read, deleting the first space from each. The imager transmits the appended
data when it reads a Code 39 bar code that starts with a character other than a space. Default
= Off.
Code 32 Pharmaceutical (PARAF)
Code 32 Pharmaceutical is a form of the Code 39 symbology used by Italian pharmacies. This
symbology is also known as PARAF.
Note: Trioptic Code must be turned off while scanning Code 32 Pharmaceutical codes.
Full ASCII
If Full ASCII Code 39 decoding is enabled, certain character pairs within the bar code symbol
will be interpreted as a single character. For example: $V will be decoded as the ASCII
character SYN, and /C will be decoded as the ASCII character #. Default = On.