C2R 30-005, User Manual

Page: 58 / 183

Colibri serie 6 : User’s guide
© 2000-2012 C2R Technologie, Sarl. All rights reserved.
58 58
Rev. A
Multiple Symbols
Note:
This feature does not work when the Imager is in Low Power mode.
When this programming selection is turned On , it allows you to read multiple symbols when
the trigger is activated. If you press and hold the trigger, aiming the Image r at a series of
symbols, it reads unique symbols once, beeping (if turned on) for each read. The imager
attempts to find and decode new symbols as long as the trigger is activated. When this
programming selection is turned
Off , the Imager will only read the symbol closest to the aiming
beam.
No Read
With No Read turned
On , the Imager notifies you if a code cannot be read. If using a
Quick*View Sc
an Data Window, an “NR” appears when a code cannot be read. If No Read is
turned Off
, the “NR” will not appear.
If you want a different notation than “NR,” for example, “Error,” or “Bad Code,” you can edit the
output message using the Data Formatter. The hex code for the No Read symbol is 9C.
Print Weight
Print Weight is used to adjust the way the imager reads Matrix symbols. If a imager will be
seeing consistently heavily printed matrix symbols, then a print weight of 6 may improve the